The GolfWorks Putter Hosels

The GolfWorks Putter Hosels fit all putter heads with a .370" hosel bore diameter and a 90° bore angle. The hosels are 100% CNC milled and available in 3 different bend profiles (S Bend, Plumbers Neck and Slant) and in 5 different lengths 1", 2", 2.5", 3" and 3.5". The lightweight aluminum hosels have a matte black PVD finish and the heavier Carbon Steel hosels have a dark chrome (dark gray) finish. The bottom stem of each putter hosel has a milled flat edge for air/epoxy relief during assembly. Each hosel features a 1/2" offset however, the actual offset of the installed hosel is relative to the distance the hosel bore of the putter is from the leading edge of the putter. All of the hosels are bendable for custom loft and lie angles.            

Features:           

• 100% CNC milled carbon and aluminum hosels     
• Right Hand Aluminum (black) hosels available in 1" S Bend (12g), 1.5" Plumber (15.5g), 2" Plumber (17.5g), 2.5" Slant (14g), 3.0" Slant (16g) and 3.5" Slant (18g) lengths
• Carbon Steel hosels (dark gray) available in 1" (35g), 2.5" (42g) and 3.0" (47g) lengths.  
• 1" S Bend and 2.5" Slant Hosel available in both right hand (RH Code - GW0138) and left hand (LH Code - GW0139) options.
• All hosels can be easily bent for custom loft and lie adjustments 
• Eliminates the need for double bend putter shafts          
• Fits putters with a .370" bore diameter and a 90° bore angle 
• 1" S Bend hosel creates a toe hang of approximately 20 degrees depending on build specifications 
• 1.5" 2", 2.5", 3" and 3.5" hosels create a toe hang of approximately 10 degrees depending on build specifications 

*Note - Inserting a left hand hosel (GW0139) into a right hand putter head with a 90 degree bore angle or right hand hosel (GW0138) into a left hand putter head with a 90 degree bore angle will create a "Zero Torque" style putter setup. Inserting the opposite handed hosel into a putter moves the center line of the putter shaft towards the back the of the putter to reduce torque.